Livicom Smart Home
Ru
Tr
Ru   Tr

Radio detectors and
control units

Build a system that meets your needs

System hub

Livi Smart Hub 4G
Livi Smart Hub 4G is an essential element of the Livicom Smart Home. It combines Livi radio devices in a unified system, receives information from the sensors, and sends notifications to user's smartphones. Livi Smart Hub 4G has a built-in diagnostics of communication channels state, power supply state, and the finance balance of the SIM-card.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Communication channels: Wi-Fi, Ethernet, 2.5G/3G/4G
Maximum connected Livi devices: 256
Power supply: 5 V/1 A adapter (included)
Built-in back-up battery: rechargeable Li-ıon battery BL-5C 3,7V 1020mAh
Operating temperature range: from 0 to +45 °C
Relative humidity level: up to 80%
Dimensions: 130 х 130 х 35 mm
Weight: 450 g

Security detectors

Livi MS motion detector
A wireless passive infrared sensor detects intrusions into a guarded site. Сustomizable sensitivity to pets weighing up to 20 kg. Protected against false alarms caused by bright light and heatwaves. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Range of motion detection: 10 m
Angle of motion detection: 88,5°
Power supply: lithium battery CR123A
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 95 x 60 x 43 mm
Weight: 110 g
Livi MSW
curtain-type motion detector
A wireless passive infrared curtain-type sensor forms a virtual wall and detects intrusions through doors and windows into a guarded site. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Range of motion detection: 12 m
Angle of motion detection: 6°
Power supply: lithium battery CR123А
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 95 x 60 x 43 mm
Weight: 120 g
Livi СS opening detector
A wireless opening sensor detects an intrusion into a guarded site. The sensor controls the opening and closing of doors, windows, shutters, hatches or gates. Livi CS consists of a magnetically operated switch and a magnet. An external wired reed switch can be connected to the sensor. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Sensing distance: up to 10 mm
Power supply: lithium battery CR123A
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Magnetically operated switch dimensions: 90 х 28 х 28 mm
Magnet dimensions: 45 х 13 х 16 mm
Weight: 80 g
Livi GS glass break detector
A wireless acoustic glass break sensor detects the shattering of glass and glass structures. An electret microphone is used to capture the sound of glass breaking into a guarded site. An external wired reed switch can be connected to the sensor. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Detection range of ordinary glass breaking: from 0,5 m to 10 m
Detection range of tempered/shatterproof glass breaking: from 0,5 m to 6 m
Glass break detection angle: 180°
Power supply: lithium battery CR123A
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 90 x 28 x 28 mm
Weight: 80 g
Livi VS vibration and tilt detector
A wireless vibration and tilt sensor with a high-precision accelerometer determines the displacement or impact on the guarded surface. The sensor can detect the signs of cutting, drilling, or breaking glass, metal, brick, and reinforced concrete structures. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Power supply: lithium battery CR123A
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 90 x 28 x 28 mm
Weight: 70 g

Emergency detectors

Livi VOC air quality detector
A wireless air quality sensor detects formaldehyde and VOC/TVOCs, measures temperature and humidity, providing accurate data for improved indoor air quality. The built-in sensors carry out measurements every 30 seconds. The device automatically sends updated readings once every 10 minutes. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Measured parameters: HCHO, VOC/TVOCs, temperature, humidity
Temperature measurement error: up to 1 °C
Humidity measurement range: from 0 to 100 %
Power supply: lithium battery CR123A
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 110 x 110 x 58 mm
Weight: 220 g
Livi LS water leak detector
A wireless water leak sensor has 2 external wired leak sensors for 2 separate areas of potential flooding. External leak sensors are protected against false alarms caused by splashes and wet cleaning. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Number of control areas: 2
Power supply: lithium battery CR123A
Operating temperature range: from 0 to +55 °C
Relative humidity level: up to 80%
Dimensions: 90 x 28 x 28 mm
External leak sensor dimensions: 35 x 35 x 13 mm
Weight: 100 g
Livi TS temperature detector
A wireless temperature sensor measures temperature at the installation location. Measurement can be done not only by the built-in temperature sensor but also by 2 additional external DS18B20 wired temperature sensors connected to Livi TS. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Measuring range of the built-in sensor: from -20 to +55 °C
Measuring range of external sensors: from -45 to +85 °С
Power supply: lithium battery CR123A
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 90 x 28 x 28 mm
Weight: 80 g
Livi HTS
humidity and temperature detector
A wireless sensor measures humidity and temperature sensor at the installation location. The built-in sensors carry out measurements every 30 seconds. The device automatically sends received data when the temperature changes by 1 °C and / or humidity changes by 5%. If both parameters do not change, then the sensor sends updated readings once every 10 minutes. Battery discharge, connection loss.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Temperature measurement error: up to 1 °C
Humidity measurement range: from 0 to 100 %
Power supply: lithium battery CR2032
Operating temperature range: from 0 to +55 °C
Relative humidity level: up to 80%
Dimensions: 45 x 24 x 12 mm
Weight: 20 g
Livi RC
resource consumption detector
A wireless resource consumption sensor can measure the consumption of electricity, hot and cold water. The device counts pulses generated at the output of the meter and can collect data from two water meters or one electricity meter. Automatically receives data every 2 minutes. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Meter connection interface: pulse output of the «dry contact» type (reed switch) or NAMUR
Number of connecting meters: 2
Power supply: lithium battery CR123A
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 90 x 28 x 28 mm
Weight: 70 g

End-point executive devices

Livi Water Control unit
A wireless water leakage protection unit cuts off the water when leakage is detected with the help of additional ball valves with electrical drives. Two wired leak sensors can be placed in separate areas of potential flooding. Livi Water Control can collect data from the pulse outputs of two household water meters. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Number of control areas: 2
Number of connecting valves: 2
Number of connecting meters: 2
Power supply: 2 lithium batteries CR123А / connector for power 5 V/1 A
Operating temperature range: from 0 to +55 °C
Relative humidity level: up to 80%
Dimensions: 98 x 98 x 34 mm
Weight: 230 g
Livi Socket
A wireless smart socket can remotely control electrical appliances with powers of up to 3.5 kW. It turns on/off the power supply, measures instant voltage and power consumption. The device can be used as a thermostat to control electric heaters or air conditioners. Build-in temperature and over-voltage protection. Connection loss notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Maximum load: 3500 W
Socket type: EU
Power supply: 90-250 V~ 50/60 Hz
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 108 x 58 x 70 mm
Weight: 160 g
Livi Relay
A wireless power relay with 1 relay output remotely controls electrical appliances with powers of up to 3.5 kW. The device can be used as a thermostat to control electric heaters or air conditioners. Built-in temperature protection. Connection loss notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Power supply: 90-250 V~ 50/60 Hz
Maximum load: 3500 W
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 43 х 36 х 17 mm
Weight: 40 g
Livi Relay 12/24
«dry contact» relay
A wireless dry contact relay remotely controls electrical appliances, gate drives, door locks with powers of up to 3.5 kW. Livi Relay 12/24 has a thermostat mode and pulse control mode with a customizable pulse duration. The device can be used as a thermostat to control electric heaters or air conditioners. Built-in temperature protection. Connection loss notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Power supply: 10 – 30 V
Maximum load: 3500 W/16 A
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80 %
Dimensions: 43 х 36 х 17 mm
Weight: 30 g
Livi Light Control unit
A wireless light control unit controls lighting via the Livicom mobile app and light switches. The device has two dry contact inputs for light switches and two control outputs. Two control outputs can be connected to two separate lighting lines or one SPDT switch (for turning a light on or off from two locations). Only incandescent and LED lamps of 10 watts or more can be used. Connection loss notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Power supply: 90-250 V~ 50/60 Hz
Does not require the neutral wire
Number of control channels: 2
Maximum load of one channel: 690 W
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 43 x 36 x 17 mm
Weight: 40 g
Livi Roller Shutter
A wireless unit controls three-phase electric drives of roller shutters, curtains, blinds, or gates via the Livicom mobile app and switches. The device has 2 inputs for roller control switches and 2 relay outputs for the motion direction (upwards/downwards). Connection loss notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Power supply: 90-250 V~ 50/60 Hz
Number of control channels: 2
Connected load: 1 induction single-phase motor
Maximum load of connected channels: 1,7 A
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 43 х 36 х 17 mm
Weight: 40 g

Control and warning devices

Livi Key Fob remote control
A wireless portable key fob for remote control can arm and disarm the security alarm system, launch scripts, and send an alarm alert. The remote control is designed as a key fob and has four programmable buttons. Battery discharge notifications.

Radio protocol: Livi
Frequency range: 868 MHz
Power supply: lithium battery CR2032
Number of control buttons: 4
Operating temperature range: from 0 to +55 °C
Relative humidity level: up to 80%
Dimensions: 61 x 35 x 13 mm
Weight: 40 g
Livi RFID security control panel
A wireless security control panel identifies users reading ISO 15693 and ISO 14443А RFID-tags. The panel allows users to arm and disarm the security alarm without using the Livicom mobile app. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
RFID-tag sensing distance: 10 mm
RFID-tag supported types: ISO 15693 / ISO 14443А-3 and ISO 14443А-4
Power supply: lithium battery CR123A
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 95 x 95 x 30 mm
Weight: 180 g
Livi Siren
A wireless siren is designed for sound notification in case of emergency (robbery, fire, accident). The external LED indicator of the security alarm state can be connected. Customizable duration and loudness of the sound notification. Sound confirmation of enabling and disabling the guard. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Power supply: 2 lithium batteries CR123А
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 98 x 98 x 34 mm
Weight: 190 g
Livi Tag RFID-tag
RFID-tag is used with security control panel Livi RFID. The tag supports standard 14443А.

Additional devices

Livi RTRM repeater
A wireless repeater is designed to bind Livi radio devices, which are installed in the area of poor radio signal reception, to the Hub. Guaranteed operating range of the hub can be increased by 2 times with the help of the repeater. It is possible to bind up to three repeaters to one hub according to the «star» scheme. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Maximum connected Livi devices in a system with one repeater: 255
Power supply: 5 V/1 A adapter (included)
Built-in back-up battery: rechargeable Li-Po battery 3,7 V, 720 mAh
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 98 x 98 x 34 mm
Weight: 265 g
Livi US universal sensor
A wireless universal sensor integrates third-party wired dry contact type security, fire, emergency or technological sensors into the Livicom system. One device can be connected to 2 outdoor security sensors, gas leakage sensors, threshold pressure sensors, level sensors, etc. Battery discharge, connection loss, device tampering notifications.

Radio protocol: Livi
Installation method: Indoor
Frequency range: 868 MHz
Number of «dry contact» inputs or Voltage-free inputs number:2
Power supply: lithium battery CR123A
Operating temperature range: from -20 to +55 °C
Relative humidity level: up to 80%
Dimensions: 90 x 28 x 28 mm
Weight: 70 g