Livicom Smart Home
Ru
Tr
Ru   Tr

Change history

Livi Smart Hub 4G firmware changelog
>
Livi Smart Hub / Livi Smart Hub 2G firmware changelog
>
Livicom mobile app changelog
>

Livi Smart Hub 4G firmware changelog

List of major changes in firmware versions
Version 1.2, 06.06.23
  • Safe switching off for the thermostat while temperature sensors failure has been added.
  • False events for Livi VS sensors have been fixed.
  • The partition arming after the hub restarts bug has been fixed.
  • A bug causing the hub restarts every 5 minutes while an unstable sensor connection has been fixed.
Version 1.1, 28.02.23
  • Connection logic between sensors and repeaters has been improved.
  • Faulty battery discharge notification has been fixed for Livi FS.
  • Shock and tilt detection thresholds have been increased for Livi VS.
  • Hysteresis settings for thermostat have been added.
  • Ability to control air conditioners using thermostat has been added.
  • Separate discharge event of Livi RTRM battery has been added for monitoring stations.
  • Fire alarm sound volume of siren has been increased.
Version 1.0, 05.10.22
  • All main functions are available.

Livi Smart Hub/Livi Smart Hub 2G firmware changelog

List of major changes in firmware versions
Version 2.1, 29.06.23
  • Safe switching off for the thermostat while temperature sensors failure has been added.
  • False events for Livi VS sensors have been fixed.
  • The partition arming after the hub restarts bug has been fixed.
  • A bug causing the hub restarts every 5 minutes while an unstable sensor connection has been fixed.
Version 2.0, 28.02.23
  • Connection logic between sensors and repeaters has been improved.
  • Faulty battery discharge notification has been fixed for Livi FS.
  • Shock and tilt detection thresholds have been increased for Livi VS.
  • Hysteresis settings for thermostat have been added.
  • Ability to control air conditioners using thermostat has been added.
  • Separate discharge event of Livi RTRM battery has been added for monitoring stations.
  • Fire alarm sound volume of siren has been increased.
Version 1.13, 04.12.20
  • The "dry contact" Livi Relay 12/24 is no longer hanging when working in the pulse mode.
  • The sensors, which do not participate in night guard, are no longer checked during the night guard enabling process.
Version 1.12, 08.10.20
  • M2MExpress mobile operator is supported.
  • The accuracy of the temperature measurement is increased for the internal channel of the Livi TS temperature sensor.
  • Mobile operators from the Republic of Turkey and the Republic of Ecuador are supported.
  • False triggers of the Livi RFID security control panel buzzer are removed.
Version 1.11, 04.06.20
  • The support of 256 Livi devices is added for the Livi Smart Hub 2G.
  • The support of new devices are added: the Livi RTRM repeater, the Livi HTS humidity and temperature sensor, the Livi CSM opening sensors and the Livi LL liquid level sensor.
  • The "detect animals" setting can be disabled for the Livi MS motion sensor in order to increase the sensor sensitivity.
  • The external sensors of the Livi TS temperature sensor and of the Livi LL liquid level sensor are monitored for the serviceability.
  • The external sensors of the Livi TS temperature sensor can be disconnected to reduce power consumption of the Livi TS sensor.
  • The Livi VS impact sensor starts monitoring the tilt.
  • The Livi LS water leak sensor can send signals to the server of the security company.
  • If the "Send an alarm signal" action is added to the script, then users can receive the alarm by SMS or through the voice call if the script is launched.
  • The accuracy of the pulse measurement is increased for the Livi RC resource consumption sensor and for the Livi Water Control unit which are connected to water meters.

  • False triggers of the Livi Siren are removed.
Version 1.10, 17.12.19
  • New alarm sounds are added to the Livi Siren and to the Livi RFID security control panel: fire alarm - one long signal per second, water leak alarm - two short signals every three seconds, emergency alarm - two short and one long signal every two seconds.
  • Condition states and timers in the running scripts stay saved if the hub restarts after firmware update or by remote user command: the timer countdown continues after the restart.

    Condition states and timers in the running scripts are reset if the hub turns on after the lack of power.
  • The alarm alert will not be sent via SMS or Voice if the site's guard is disabled.
  • The transitions of days are taken into account for round-the-clock scripts.
Version 1.9, 07.11.19
  • The problem of controlling endpoint devices when the hub is running on battery is fixed.
  • The problem of restoring the state of endpoint devices when disconnecting and restoring power from the 230 V mains is fixed.
  • The logic of the passage switch is enabled for the Livi Light Control unit.
  • The notifications of auxiliary sensor's alarm will not be sent via SMS or Voice.
  • The problem with confirming delivery of events by voice calls is fixed.
  • A set of measures is taken to improve the stability of the radio channel.
Version 1.8, 03.08.19
  • A control flag for connected sensors is added to the Livi TS temperature sensor.
  • The latching, non-latching and the passage switch modes are added to the Livi Light Control unit.
  • The latching and non-latching modes are added to the Livi Roller Shutter unit.
Version 1.7, 29.04.19
  • The "Night Guard" function is improved.
  • New conditions are added to the event-driven scripts (the group guard enabling and disabling).
Version 1.6, 18.02.19
  • The format of SMS control commands is changed (the command no longer starts with the hub serial number).
  • The Livi Roller Shutter unit and the Livi Light Control unit are supported.
  • The launch of the radio network is accelerated when the hub is turning on.
  • The water leak and gas leak events are no longer transmitted by emergency and technological sensors to the security company server.
Version 1.5, 17.12.18
  • Livi Smart Hub 2G is supported.
  • The maximum number of actions in scripts is increased from 32 to 64.
  • The maximum number of conditions in scripts is increased from 32 to 127.
  • Advanced scripting logic is supported (e.g. multiple conditions, AND / OR schemes, time limits).
  • New conditions are added to the event-driven scripts (e.g. built-in timer for no motion, Livi US events and several system events).
  • The Livi Relay12/24 and the Livi MSW sensors are supported.
  • A special "Thermostat" mode is implemented for the Livi Relay, the Livi Relay 12/24 and the Livi Socket.
  • The SMS command is supported for remote control of the chosen endpoint device.
Version 1.4, 31.10.18
  • The night guard cannot be disabled if the full guard is enabled.
  • If a SIM-card is absent, the corresponding event does no longer repeat.
  • The alarm threshold for the Livi LS water leak sensor and for the Livi Water Control unit is doubled to avoid false alarms.
  • The Livi US universal sensor is supported.
Version 1.3, 02.08.18
  • The SMS command is supported for configuring parameters of any GSM operator.
  • The delay for entry/exit can no longer be applied when the guard is enabled/disabled using the Livi Key Fob remote control.
  • The temperature correction of the Livi MS motion sensor sensitivity is implemented.
Version 1.2, 25.05.18
  • The alarm threshold for the Livi LS water leak sensor is doubled to avoid false alarms.
  • The last state of the socket or relay is restored, when the power is restored.

Livicom mobile app changelog

List of major changes in app versions from 1.0 to 1.6.
Version 1.6, 13.11.20
  • The confirmation code can be received via e-mail when the client registers in the app.
  • The English language can be selected on the "More" tab in the app.
Version 1.5.1, 09.09.20
  • All main functions of the app are available: en-En.
Version 1.0, 17.10.17
  • All main functions of the app are available: ru-RU.
Back to Resources